Water Beast 5000

Wastewater treatment plants with a membrane bioreactor

800 – 3000 m3/day designed for 5,000 – 15,000 inhabitants

Water Beast 5000 offers a solution to minimize construction works and quickly deliver the treatment plant and put it into operation.

Process tanks are circular with inner division of individual tanks. They are made up of metal sheets enamelled on both sides, mutually screwed together and sealed. They are placed on a water-resistant reinforced concrete plate.
6m high tanks may be supplied as open or roofed, equipped with thermal insulation or without it. Auxiliary operating facilities consisting of a control room with a sanitary facility, a bioreactor and sludge dewatering control are also delivered fully assembled, at the construction site they just have to be mutually interconnected and connected to the process tanks. The technological equipment is supplemented with a sand separator and adapted to the designed output. The operation of this type of treatment plants is fully automatic with the possibility of remote control via mobile devices or PC. We give a WWTP with an output of 1000m3/day as an example. It consists of three circular tanks with the following parameters:

N1 – Accumulation tank

The accumulation tank is located in the circular tank itself with a diameter of 8.57m and height of 5.8m with a volume of 330m3. It contains a sand trap, a stirrer and pumps for pumping the treated water into biological treatment tanks. The mechanical pre-treatment and thereafter also the interception of fats and oils of plant and animal origin (if the character of mainly industrial WW requires it) takes place separately before entry into the accumulation tank.

N2 – Treatment process tanks

The treatment process tanks – they include 2 concentric circular tanks, the outer tank has a diameter of 11.14m and a height of 5.8m, the inner one 6.86m. The inner tank with a volume of 211m3 is used as a denitrification tank. The space in the annular area is divided into 3 parts with dividing walls: the anaerobic section with a volume of 71m3, the nitrification section 177m3 and the bioreactor section 106m3.

Possible use of the treatment plant

municipalities

areas with an increased level of environmental protection

crisis areas

commercial objects

industrial objects

Innovative solution

The membrane bioreactor MBR is a facility for perfect wastewater treatment.

Cleaned water is extracted through micro pores (0.04μm) in the walls of thousands of fine fibres of the membrane bioreactor. Water thus cleaned does not contain almost any insoluble substances and most of the bacteria, which is why it can be used as service water for irrigation and for the restoration of natural water areas and wetlands.

more about treatment process

Proposal for the location of Water Beast 700 in the vicinity of a protected landscape area

A typical site for embedding a container WWTP with a MBR is an agglomeration of minor municipalities and settlements in mountain areas with recreational facilities with sports facilities, hotels and hostels. This is an opportunity to reuse well cleaned water and also a possibility to retain it in the area. The dewatered stabilised sludge produced from the WWTP is suitable for use in local compost plants and for agricultural purposes in plant production.

Features of the treatment plant

a very short manufacture, installation and commissioning time, 3-6 months

high treatment efficiency, for some indicators up to 99%

use of cleaned water as service water, the possibility of discharge into low-flow watercourses

possibility of funding through EU funds, banks and leasing

saving of costs related to the construction of a system of concrete tanks

fully automatic and almost unattended operation

an application for remote control and for checking the condition from a PC, smartphone or tablet

built-up area compared to conventional WWTPs and low construction costs

Downloads

Remote control

The latest generation of PLC, a database and visualisation system, works under both the Android and iOS systems. After it is connected via the internet, it is any time capable of monitoring the state, correcting the automatic WWTP control or switching the operation to the manual mode. The visualisation system provides timely alerts to changes of process values beyond required ranges, which helps prevent emergency situations of the WWTP. For service purposes, it is possible to retrospectively monitor all states, alarms and messages. Remote diagnostics and preventive maintenance thus help you substantially reduce service costs and predict potential emergency situations. We offer the possibility to connect to the manufacturer‘s dispatching. Statistical evaluation of selected process parameters representing the amount of cleaned water and energy consumption at selected time intervals goes without saying.

more about facilities and equipment

Contact us


Contacts

PhDr. Norbert Skyrčák

konateľ,
predaj čistiarní

info@tercial.sk